Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

We are required by the standards to carry out two types of validation.

The primary validation type ensures compliance with the training package requirements for your RTO's assessments.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.

Understanding the Two Types of Assessment Validation

What Does Assessment Validation Mean?

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.

On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

We will dedicate this article to assessment tool validation.

How to Conduct Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

When Should You Conduct Assessment Tool Validation?

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.

There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.

However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:

- you update resources
- new training products are added on scope
- when course is reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

What Training Products Need Validation?

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Resources Required for Assessment Tool Validation

Training Materials

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Assessment Validation Panel

Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.

Overall, your validation panel should have:

Relevant vocational competencies and industry skills for the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the equivalent successor

Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?

Basic Rules of Evidence

Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool proving that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:

Act on Your Words

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

nappy change

bottle preparation, feeding babies from bottles, and cleaning equipment

solid food prep and feeding babies

respond to baby signs and cues appropriately

prepare and settle infants for sleep

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet Validate assessment tools for RTO the requirement.

Total or Not Competent

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

The answer could include:

Essential resources

Corresponding costs

Time required for activities

Appointed duties and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers may include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolation, engineering controls, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administration

Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.